5/8" Rigging Clamp Type A

5/8" Rigging Clamp Type A

$217.44
Item #KRC062-A
The KRC Adjustable Rigging Clamp is a self adjusting, ready to install rigging clamp capable of safe working loads of up to 5,000 lbs.  The shackle connection allows loads to be applied up to 45 degrees.
OR
Description

Details

The KRC Adjustable Rigging Clamp is a self adjusting, ready to install rigging clamp capable of safe working loads of up to 5,000 lbs.  The shackle connection allows loads to be applied up to 45 degrees.  The Adjustable Rigging Clamp can accommodate a variety of flange widths and thicknesses and is installed without the need for any drilling or welding to the support beam.

The Adjustable Rigging Clamp is available in five standard sizes to accommodate any flange width from 4” to 24”.  The Adjustable Rigging Clamp is designed to be self adjusting to the flange thickness from as little as 1/8” to as thick as 2-1/2”.

The Adjustable Rigging Clamp is designed to accommodate the safe working load not to exceed 5,000 lbs.

 

Product CodeFlange WidthBolt Torque (ft. lbs)Number of BoltsSafe Working Load
KRC062-A 4" - 8" 109 4 5,000 lbs.

Note: Do not exceed Safe Working Load.

The structural integrity of the existing steelwork should be verified by a licensed structural Engineer.

Reviews
Ask A Question

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Ask A Question about 5/8" Rigging Clamp Type A

Information

Message

* Required Fields