The Type BA BeamClamp is used to connect steel with parallel flanges. It has a recess to capture the head of a Grade 5 bolt. This allows the installer to use a single wrench for installation.
1″ Type BA
1″ Type BA
$21.83
Product Description
The Type BA BeamClamp is used to connect steel with parallel flanges. It has a recess to capture the head of a Grade 5 bolt. This allows the installer to use a single wrench for installation. The BA is available in three tail length, 1, 2 & 3. The tail length plus the thickness of appropriate packings BF1, BG1, & BH1 should be equivalent to the flange thickness being connected. See table for tail length packing combinations.
| Product Code | Price | Bolt Dia. A | Description | B | C | D1 | D2 | E | Width | Torque | Tensile SWL (lbs.) per bolt | Friction SWL (lbs.) per 4 bolts | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | (ft. lbs.) | |||||||||||
| BA1G24 | ???? | 1″ | 1″ Type BA Short | 1″ | 1-15/16″ | 1/2″ | 1″ | 3/8″ | x | x | 2-1/8″ | 355 | 4743 | 4047 |
| BA2G24 | ???? | 1″ | 1″ Type BA Medium | 1″ | 1-15/16″ | 1/2″ | 1″ | x | 1/2″ | x | 2-1/8″ | 355 | 4743 | 4047 |
| BA3G24 | ???? | 1″ | 1″ Type BA Long | 1″ | 1-15/16″ | 1/2″ | 1″ | x | x | 5/8″ | 2-1/8″ | 355 | 4743 | 4047 |
Do not exceed the Safe Working Load (SWL) specified. The Safe Working Loads are based on assemblies tested in typical conditions.
Tail Length / Packing Combination
| Flange Thickness | 1/8″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 7/16″ | 1/2″ | 9/16″ | 5/8″ | 11/16″ | 3/4″ | 13/16″ | 7/8″ | 15/16″ | 1″ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tail Length/Packing Combination | X | X | X | 1 | 1 | 2 | 2 | 1+BH1 | 3 | 1+(2xBH1) | 3+BH1 | 3+BH1 | 1+BF1 | 2+BF1 | 1+BH1+BF1 |
For Thickness greater than 1″ please contact us.
| Product Code | Bolt Dia. | A | B | C | D |
|---|---|---|---|---|---|
| BH1Z24 | 1″ | 3/16″ | 1-3/4″ | 2-3/16″ | 1-1/16″ |
| BH1Z24 | 1″ | 1/2″ | 1-3/4″ | 2-3/16″ | 1-1/16″ |
| BH1Z24 | 1″ | 1″ | 1-3/4″ | 2-3/16″ | 1-1/16″ |