3/4″ Type BA

  1. Home
  2. 3/4″ Type BA

3/4″ Type BA

$10.91

SKU: CONF-BA20

The Type BA BeamClamp is used to connect steel with parallel flanges. It has a recess to capture the head of a Grade 5 bolt. This allows the installer to use a single wrench for installation.

x

Product Description

The Type BA BeamClamp is used to connect steel with parallel flanges. It has a recess to capture the head of a Grade 5 bolt. This allows the installer to use a single wrench for installation. The BA is available in three tail length, 1, 2 & 3. The tail length plus the thickness of appropriate packings BF1, BG1, & BH1 should be equivalent to the flange thickness being connected. See table for tail length packing combinations.

Product Code Price Bolt Dia.      A Description B C D1 D2 E Width Torque Tensile SWL (lbs.) per bolt Friction SWL (lbs.) per 4 bolts
                1 2 3   (ft. lbs.)
BA1G20 ???? 3/4″ 3/4″ Type BA Short 13/16″ 1-3/8″ 7/16″ 13/16″ 5/16″ x x 1-3/4″ 210 3703 2473
BA2G20 ???? 3/4″ 3/4″ Type BA Medium 13/16″ 1-3/8″ 7/16″ 13/16″ x 3/8″ x 1-3/4″ 210 3703 2473
BA3G20 ???? 3/4″ 3/4″ Type BA Long 13/16″ 1-3/8″ 7/16″ 13/16″ x x 1/2″ 1-3/4″ 210 3703 2473

Do not exceed the Safe Working Load (SWL) specified. The Safe Working Loads are based on assemblies tested in typical conditions.

 

Tail Length/Packing Combination

Flange Thickness 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″ 13/16″ 7/8″ 15/16″ 1″
Tail Length/Packing Combination X X 1 1    2 1+BH1 3 2+BH1 3+BH1 1+BF1 1+(3xBH1) 2+BF1 2+(3xBH1) 2+BH1+BF1 1+(2xBH1)+BF1

For Thicknesses greater than 1″ please contact us.

 

Product Code Bolt Dia. A B C D
BH1Z20 3/4″ 3/16″ 1-5/16″ 1-11/16″ 13/16″
BF1G20 3/4″ 3/8″ 1-5/16″ 1-11/16″ 13/16″
BG1G20 3/4″ 3/4″ 1-5/16″ 1-11/16″ 13/16″

More of this Type

No results found.