3/8″ Type BA

  1. Home
  2. 3/8″ Type BA

3/8″ Type BA

$3.95

SKU: CONF-BA10

The Type BA BeamClamp is used to connect steel with parallel flanges. It has a recess to capture the head of a Grade 5 bolt. This allows the installer to use a single wrench for installation.

x

Product Description

The Type BA BeamClamp is used to connect steel with parallel flanges. It has a recess to capture the head of a Grade 5 bolt. This allows the installer to use a single wrench for installation. The BA is available in three tail length, 1, 2 & 3. The tail length plus the thickness of appropriate packings BF1, BG1, & BH1 should be equivalent to the flange thickness being connected. See table for tail length packing combinations.

Product Code Bolt Dia.      A Description B C D1 D2 E Width Torque Tensile SWL (lbs.) per bolt Friction SWL (lbs.) per 4 bolts
              1 2 3   (ft. lbs.)
BA1G10 3/8″ 3/8″ Type BA Short 1/2″ 13/16″ 1/4″ 7/16″ 1/8″ x x 1″ 14 562 X
BA2G10 3/8″ 3/8″ Type BA Medium 1/2″ 13/16″ 1/4″ 7/16″ x 3/16″ x 1″ 14 562 X
BA3G10 3/8″ 3/8″ Type BA Long 1/2″ 13/16″ 1/4″ 7/16″ x x 5/16″ 1″ 14 562 X

 Do not exceed the Safe Working Load (SWL) specified. The Safe Working Loads are based on assemblies tested in typical conditions.

Tail Length/Packing Combination

Flange Thickness 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″ 13/16″ 7/8″ 15/16″ 1″
Tail Length/Packing Combination X 2 1+BH1 3    1+BF1 3+(2xBH1) 3 + (3xBH1) 1+BG1 1+BH1+BG1 3+BG1 1+BF1+BG1 2+BF1+BG1 3+BF1+BG1 2+BF1+(2xBG1) 1+(2xBG1)

For Thicknesses greater than 1″ please contact us.

 

 

Product Code Bolt Dia. A B C D
BH1Z16 5/8″ 1/8″ 1-1/8″ 1-3/8″ 11/16″
BF1G16 5/8″ 5/16″ 1-1/8″ 1-3/8″ 11/16″
BG1G16 5/8″ 5/8″ 1-1/8″ 1-3/8″ 11/16″

More of this Type

No results found.