The 5/16” Type BB beam clamp is used to connect steel with parallel flanges. This clamp is available with a medium tail length only.
5/16″ Type BB
5/16″ Type BB
$1.93
Product Description
The 5/16” Type BB is used to connect steel with parallel flanges. This clamp is available with a medium tail length only. The tail length plus the thickness of appropriate packings BF1, BG1 & BH1 should be equivalent to the flange thickness being connected. See table below for tail length / packing combinations.
| Product Code | Bolt Dia. A | Description | B | C | D1 | D2 | E | Width | Torque | Tensile SWL (lbs.) per bolt | Friction SWL (lbs.) per 4 bolts | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | (ft. lbs.) | ||||||||||
| BB2G08 | 5/16″ | 5/16″ Type BB Medium | 3/8″ | 5/8″ | X | 3/8″ | X | 1/8″ | X | 13/16″ | 4 | 281 | X |
Do not exceed the Safe Working Load (SWL) specified. The Safe Working Loads are based on assemblies tested in typical conditions.
Tail Length/Packing Combination
| Flange Thickness | 1/8″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 7/16″ | 1/2″ | 9/16″ | 5/8″ | 11/16″ | 3/4″ | 13/16″ | 7/8″ | 15/16″ | 1″ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tail Length/Packing Combination | X | 2 | 2+BH1 | 2+BF1 | 2+BH1+BF1 | 2+BH1+BF1 | 2+BG1 | 2+BH1+BG1 | 2+BF1+BG1 | 2+BH1+BF1+BG1 | 2+BH1+BF1+BG1 | 2+(2xBG1) | 2+BH1+(2xBG1) | 2+BH1+(2xBG1) | 2+BH1+(2xBG1) |
For Thickness greater than 1* please contact us.
| Product Code | Bolt Dia. | A | B | C | D |
|---|---|---|---|---|---|
| BH1Z08 | 3/8″ | 1/16″ | 5/8″ | 7/8″ | 3/8″ |
| BF1G08 | 3/8″ | 1/8″ | 9/16″ | 7/8″ | 3/8″ |
| BG1G08 | 3/8″ | 5/16″ | 9/16″ | 7/8″ | 3/8″ |
More of this Type
